Sound siphon in obs drivers#
Sound siphon in obs mac#

You can now load a track to the assigned decks and test the input signal. I have noticed that sometimes this will reset the input signal, and you may even hear a 'click' in your mixer when doing so - this is normal.Ĭlick the X to close the Preferences window. If you don't see the circles, scroll back down and try switching the Control Hardware setting to another setting and back. The circles will auto-calibrate, but if you need to make adjustments, you can do so following the instructions available by clicking the ? icon beside Control Signal Setting. You should see green circles in the scopes for your input channels. Scroll back up and test your inputs by playing the control signal source on your turntable or CDJ. If you want to change the hardware input configuration for each deck, you can use your mouse to drag the 'wire' between the Deck and the Mixer Channel to re-assign it. Scroll the window down and select the Control Hardware for your setup to Turntables, CDJs, or if you use a mix of the two, select Customized Setting and follow the instructions. You don't need to assign the Input channels now as that will change automatically depending on your DVS configuration.Ĭlick the DVS icon in the preferences window and check the box beside Enable DVS Function. IF you prefer it to be sequential on the DJM (1 / 2 / 3 / 4), simply assign the outputs in numerical order above. The order and numbering may look funny, but that is the correct order to match the typical channel layout on the DJM (3 / 1 / 2 / 4). With your DJM connected and powered-on, open rekordbox, and open the Preferences > Audio, select DJM-900NXS2 as your Audio device.Ĭlick External for the Mixer Mode, and scroll down to configure the Output Channels. No need to set the other input selections as they can be set through rekordbox in step 5. If you are using a DJM-900nexus, which only has 4 pairs of outputs, you will be in a situation where you can't use 4 channels of audio from your software, sorry! If your DJM doesn't have 9/10, use the highest available pair and remember this later when 9/10 is referenced again. On the Mixer Output tab, set the USB9/10 output to MIX(REC OUT). Open the DJM's Setting Utility application. You can also use other similar applications such as Sound Siphon or Loopback, but those are both paid apps and Soundflower works, and is free, so why not?

Sound siphon in obs mac#

There is just one extra tool necessary for us Mac users:

Sound siphon in obs drivers#

If you are using a DDJ, see the DDJ section of the Knowledge Base for additional tutorials.Įnsure that you are running the latest version of rekordbox, that your drivers and firmware are up-to-date, and that your broadcast software is current as well. If you are using a DJM without DVS, the instructions are slightly different please see the this guide. The instructions provided herein are based around a DJM-900NXS2, but they will apply to other products as well, simply substitute your mixer where applicable, and select the relevant input / output channels for your device. This guide is a how-to for streaming using a 3rd party software such as OBS, and many of these instructions may also be applied to other software.